CLO-3000C is an on-line analyzer built to measure Chlorine Dioxide/Ozone Levels in the range of 0.01–20 ppm In drinking water, waste water and process applications.

The measuring systems is potentiostatic based And provide an accurate and stable reading with an auto. temperature compensation. The reading can be sent through the isolated 4-20 mA Output to any control device, computer or data logging system and 3 SPDT relays provide a local Alarm/control dry contact signal or proportional control signals (PFM or PWM).

The Analyzer is provided with an IP-65 enclosure with a clear door and 2 lockers. The controller has the option for Key board lock.

Walchem’s WDIS Series controller will reliably and economically control your water treatment disinfection process. The controller includes four standard sensor input options (free chlorine/bromine, chlorine dioxide, ozone, peracetic acid) or can be configured to use a variety of other types or ranges of Walchem disinfection sensors, such as hydrogen peroxide or total chlorine.

 

The WDIS Series controller takes the guesswork out of your disinfection process. The chemical concentration is continuously monitored and controlled to the precise range required for proper system control and regulatory compliance.